Skylight / July 12, 2018 / Odo Vaillancour
For example the optimum slope for a south-facing skylight in Columbus Ohio at 40º North latitude is 45º to 55º. Every skylight has a "shaft" which governs how much light is admitted into the room below. If all four sides are flared then the light is spread over a wide area. If your skylight has a shaft with perpendicular sides the light is focused straight below. If your skylights shaft is flared on only one or two sides then the light is sprayed in the flared direction. Ventilation If you wish you can have a skylight which also provides ventilation as well as light to your room. This allows you to release the hot air which collects at your ceiling.
Typically flat glass skylights include all the installation materials and they are among the easiest to install. Moreover because they are glass these flat skylights are less likely to scratch. Domed acrylic skylights are among the most affordable especially compared to glass alternatives. These skylights are available in a variety of tints making them an attractive addition to any home or room. Unfortunately domed acrylic skylights do not offer the same noise protection as glass varieties and they tend to be more susceptible to leaking. Function Now that you know a little bit about the types of skylights available you should take some time to consider their function.
To maximize the energy efficiency of skylight windows you must choose the material carefully. Both glass and plastic skylights have their unique benefits and disadvantages. Glass is more durable but there are limitations in shape. It is also quite expensive. On the other hand plastic is flexible and can easily be bent or stretched to different shapes. It is inexpensive too. But plastic glazing has a tendency to change color after a while. More importantly irregular shapes lead to more heat loss as larger surface areas are exposed. Windows VS Skylights: It is wrong to believe that skylights can replace or take the place of windows.