Skylight / July 12, 2018 / Odo Vaillancour
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
Skylights are best suited to catch sunlight from the overhanging clouds. In addition to this skylight windows allow a deeper penetration of the suns light into the structure of the house in such a way that it is less obtrusive. Skylights also keep heating and cooling costs down. Skylights are your windows to the heaven. They can breathe drama into any living space. And they are all the rage these days. In such a scenario it is easy for people to forget important considerations while choosing skylights. Energy problems that influence windows operate just as strongly or even more so in skylights. For instance heat loss heat gains solar gains ventilation and water pooling affect skylight windows too.
Your ventilating skylight can be operated by one of three ways: Manual skylight controls - These are opened by your use of an extended rod to manually crank the skylight open. These are designed for ceilings of less than 15 feet. Electronic skylight controls - A simpler model of this type of control is wired to a wall mounted switch which opens and closes the skylight. More complex models are controlled by a special wall console of a wireless remote control. Automatic operating controls - With this type of control integrated heat sensors trigger the skylight to open when the interior heat reaches a preset temperature. Exterior sensors automatically close the unit when they sense moisture.