Skylight / July 8, 2018 / Baptiste Allain
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
To reflect an even greater amount of light into the room consider painting the inside of the shaft with gloss or semi-gloss white paint. The glass skylights are far superior to the plastic ones. The best glass skylights are surface-mounted. The flashing curb and lens are all manufactured together. They do not have separate moving parts. This makes them less susceptible to leakage and much quieter when it rains. From fixed skylights to flat glass and domed varieties many homeowners are shocked to discover there are a wide variety of skylights available for your home. Skylights are a great addition if youd like to bring natural light to a room or for creating a feeling of lightness and space.
Angled where the shaft is parallel to the pitch of the skylight. It too is the same dimension as the skylight but its straight-in angle offers more light than a straight shaft. Angled shafts also are used to connect two locations that cannot otherwise be aligned. This occurs when the skylight must be installed in a particular spot - between two trusses for example - and the shaft opening is likewise limited to a particular location on the ceiling that is not directly under the skylight. Splayed or pyramid in which the ceiling opening is larger than the skylight opening in width length or both. This type although a little harder to construct is the most popular simply because it allows a smaller skylight to illuminate a larger area.