Skylight / July 11, 2018 / Nicolas Charlebois
After the hole is cut the skylight frame is simply attached to the roof sheathing with L-brackets and then the installation is completed using the factory-supplied flashing kit. Ease of installation superior insulating qualities less tendency to scratch and a cleaner finished appearance all add to the popularity and somewhat higher cost of glass skylights. Glass skylights also have a greater number of optional accessories. These include tempered laminated or wire glass; shades and blinds for light control; glass tints for heat retention or to block sunlight; and the ability to open fully or partially for ventilation. Domed acrylic skylights are less expensive than glass.
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.