Skylight / July 11, 2018 / Nicolas Charlebois.
The structure of the house is another deciding factor. If there are beams pillars or pipes in the way the skylight on the roof may not get the right amount of visibility. Making structural changes is not an affordable option in most cases. So it is better to evaluate the room before you place skylights on the roof. In most cases skylights should be built into the house at the time of drawing the design of the house. In case skylights are introduced at a later point of time care must be taken to ensure that they are placed correctly and installed properly. Skylights are overhead windows often in a roof that allow sunlight to filter inside any enclosed area; they are a great natural light option to artificial lighting solutions during the daytime.
The air near the ceiling is automatically cooled when fresh air flows in from outside. These roof skylights are so designed that they open and close a little to let in the fresh air. The glass tilts at about 45 degrees. There is a small handle to manually open the venting roof skylight. You crank the handle slightly to open or close or adjust the angle and position of the glass. The venting roof skylights are located in the ceiling of the house and are hard to reach so there is an extension to the handle. Otherwise every time you want to open or shut the venting roof skylight you will need a ladder or a high stool. Nowadays electronically operated venting skylights are also becoming very popular.
This heat gain can be minimized by installing your south-facing skylight in the shade of deciduous trees or adding a moving window covering. Skylights come in all shapes and sizes. Its size greatly affects the illumination level and temperature of the space below. As a rule of thumb the size of a skylight should never be more than 5% of the floor area in rooms with many windows; and no more than 15% of the rooms total floor area for spaces with few windows. Dept. of Energy. Glazing Like windows skylight manufacturers use different types of glazing to improve their energy efficiency. The glazing comes in three different forms. Plastic glazing - This type of glazing is usually inexpensive and less likely to break than other glazing materials.
To make sure that glass skylights are protected these are made of tempered glass on the outside and have a laminated pane on the inside. Position: Where and how you place skylights within the home is equally important. Location plays a vital role in natural lighting and solar heating. When they are placed on the roof and facing the north you can expect consistent but cool lighting. Skylights that face the east provide maximum solar energy in the mornings while those facing the west will give maximum afternoon sunlight. If heat is a problem you may install skylights in the shade of a tree or have a shading device on top of the skylight. The slope at which skylights are placed also controls the amount of heat and light received. Before buying skylights for the home do a little research. Prices tend to vary from a few hundred to a few thousand dollars. Price climbs with the addition of features like shading devices remote control and special glazing.