Skylight / July 12, 2018 / Odo Vaillancour
It is recommended that the skylight size should never be more than five percent of the floor area in rooms with many windows and not more than fifteen percent of the rooms total floor area for spaces with very few windows. Skylights on north-facing roofs provide cool illumination while east-facing roofs provide maximum light and heat in the morning. West-facing skylights provide afternoon sunlight and heat. South-facing skylights provide more passive solar heat than any other location. Skylights are an excellent way to bring more natural light into your home. Just one skylight can dramatically transform your room by adding 30% more natural light than a window. This helps you save energy and makes your home warmer during the winter.
Angled where the shaft is parallel to the pitch of the skylight. It too is the same dimension as the skylight but its straight-in angle offers more light than a straight shaft. Angled shafts also are used to connect two locations that cannot otherwise be aligned. This occurs when the skylight must be installed in a particular spot - between two trusses for example - and the shaft opening is likewise limited to a particular location on the ceiling that is not directly under the skylight. Splayed or pyramid in which the ceiling opening is larger than the skylight opening in width length or both. This type although a little harder to construct is the most popular simply because it allows a smaller skylight to illuminate a larger area.
However these surfaces scratch easily and can become brittle and discolored. Glass glazing - This is found in the more expensive skylights. It is more durable than plastic and does not discolor. All glass used for skylights must be made of "safety glazing" a generic term for both tempered and laminated glass. Tempered glass is the most impact resistant. Laminated glass is fabricated with a thin layer of plastic embedded near the center of the glass. Both types keep the glass from breaking into large sharp pieces. Skylights are often made with a tempered glass on the exterior side and a laminated pane on the interior side. This arrangement gives maximum impact resistance while protecting occupants from falling shards of glass.