Skylight / July 11, 2018 / Nicolas Charlebois
For example the optimum slope for a south-facing skylight in Columbus Ohio at 40º North latitude is 45º to 55º. Every skylight has a "shaft" which governs how much light is admitted into the room below. If all four sides are flared then the light is spread over a wide area. If your skylight has a shaft with perpendicular sides the light is focused straight below. If your skylights shaft is flared on only one or two sides then the light is sprayed in the flared direction. Ventilation If you wish you can have a skylight which also provides ventilation as well as light to your room. This allows you to release the hot air which collects at your ceiling.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.
A skylight might seem like the easiest option for rooms that are cramped dingy and dark. In many cases it is but only if the right kind of skylight is combined with the right type of roof. Fixing a skylight on the roof is not like placing a window in the wall. Most of us think only of the interior when we fix skylights. But did you know that your first priority should be your roof followed by the positioning of the skylight on the roof? The shape of the roof is a vital to the selection of skylights. There are different skylights for sloped roofs and different skylights for flat roofs. Incorrect installation can lead to problems in the future.