Skylight / July 11, 2018 / Nicolas Charlebois
The acrylic dome is typically mounted in an aluminum frame which is in turn mounted on a box called a "curb." Once the hole is cut in the roof to the manufacturers specifications the curb is typically constructed on-site to raise the skylight above the level of the roof sheathing. Site-built or factory-supplied flashings are used to seal the roofing around the curb. Domed skylights are available in clear smoked bronze or other tints. Some domed plastic skylights are flush mounted which means that the lens piece and flashing piece are both made of plastic and then placed on the roof without a curb. The problem with this type is that they are loud and very susceptible to leakage.
Fixed skylights are among the most popular and they come in a wide variety of shapes. Ventilated skylights can be opened and closed to allow the passage of air. These make a great addition to bathrooms and kitchens and they can be controlled by temperature sensor remote control wall switch and manual or motorized cranks. Tubular skylights are among the newest styles. They are popular because they are small and can be used where full-sized skylights will not fit. They allow for the passage of light and theyre installed the same way as regular skylights. Flat glass skylights are built into a framework (usually made of wood rubber or metal) and can be placed directly into a cut hole in your roof.
Glass and acrylic or plastic skylights are available. Tubular skylights are relatively new on the scene. The small size allows them it to be used in spaces where full-sized skylights cannot. Hallways bathrooms even closets can accommodate a tubular skylight. They provide a lot of light in spite of their small size. The concept and installation process are basically the same as for a regular skylight except they have an enclosed tunnel of reflective material to reflect the light. They are available in many sizes. The small ones are 10 to 12 inch diameter and the large ones are 24 inches. Flat glass skylights come mounted in a wood or integrated rubber and metal framework and require no additional curb construction.