Skylight / July 12, 2018 / Odo Vaillancour
A skylight is like a window which has been placed in your roof. It has a frame specially designed to withstand rain and prevent leakage from rain and snow. To maximize a skylights use of natural light to illuminate a room or its passive solar heating potential you will want to take into consideration how a skylight is positioned. Facing north your skylight will provide fairly constant illumination but will not provide a lot of heat. Facing east it will provide the maximum amount of light and solar heat gain in the morning. Facing west your skylight provides afternoon sunlight as well as heat gain. A skylight facing south provides the greatest potential for winter passive solar heat gain than any other location but will often allow unwanted heat gain in the summer.
Solar heat control glazing - Manufacturers use various glazing methods to reduce the impact of summer time solar heat gains and winter time heat losses. These come in the form of heat-absorbing tints double and tripled paned skylights and low-emissivity coatings. Slope When your window professional installs your skylight one of the factors they will take into consideration is the slope. The slope or tilt of the skylight affects the amount of solar heat gain. A low slope on your skylight admits more solar heat in the summer and less in the winter which is the opposite of the effect you are trying to achieve As a rule of thumb you want to achieve a slope equal to your geographical latitude plus 5 to 15 degrees.
Fixed skylights are among the most popular and they come in a wide variety of shapes. Ventilated skylights can be opened and closed to allow the passage of air. These make a great addition to bathrooms and kitchens and they can be controlled by temperature sensor remote control wall switch and manual or motorized cranks. Tubular skylights are among the newest styles. They are popular because they are small and can be used where full-sized skylights will not fit. They allow for the passage of light and theyre installed the same way as regular skylights. Flat glass skylights are built into a framework (usually made of wood rubber or metal) and can be placed directly into a cut hole in your roof.