Skylight / July 11, 2018 / Nicolas Charlebois
The structure of the house is another deciding factor. If there are beams pillars or pipes in the way the skylight on the roof may not get the right amount of visibility. Making structural changes is not an affordable option in most cases. So it is better to evaluate the room before you place skylights on the roof. In most cases skylights should be built into the house at the time of drawing the design of the house. In case skylights are introduced at a later point of time care must be taken to ensure that they are placed correctly and installed properly. Skylights are overhead windows often in a roof that allow sunlight to filter inside any enclosed area; they are a great natural light option to artificial lighting solutions during the daytime.
Some people in an effort to let in plenty of light choose the biggest skylight they can afford. But bigger is not always better when it comes to choosing skylights for your home. The size of the skylight should not be more than 5% of the floor space if there are other windows in the room. It should be less than 15% of the floor space if there are few windows in the room. Unlike commercial buildings where structures are huge there is only so much that a room within the house can take. So choose skylights that suit the size of the room. Style: Although most skylights are rectangular these are available in a variety of sizes shapes and colors.
You will need to position and mark the opening on the ceiling after the skylight is installed. Take into consideration the size of the room and the amount of light you wish to bring in and select the size and position of the hole accordingly. Once the skylight is installed and the ceiling hole is cut its then a matter of connecting the two with the shaft which is typically constructed from 2x4 or 2x6 lumber. The angles involved typically require some tricky framing and is probably best left to an experienced carpenter. After the framing is completed the inside of the shaft is covered with wood or drywall and the attic side is insulated to minimize heat loss.